Oakley Sound Systems Analog Synthesizer Modules
The Oakley MultiLadder VCF
multiladderfp.jpg
MultiLadder FP
65 KB		 multiladder1.jpg
MultiLadder PCB
105 KB		 multiladder2.jpg
MultiLadder PCB
91 KB

The Oakley OMS-301 VCO
oms301fp.jpg
OMS-301 FP
69 KB		 oms301a.jpg
OMS-301 PCB
104 KB		 oms301b.jpg
OMS-301 PCB
99 KB

The Oakley WaveFolder
wavefolderfp.jpg
Wavefolder FP
75 KB		 wavefoldera.jpg
Wavefolder PCB
108 KB		 wavefolderb.jpg
Wavefolder PCB
78 KB

The Oakley Equinox VC Phaser
equinoxfp.jpg
Equinox FP
20 KB		 equinox1.jpg
Equinox PCB
47 KB 		equinox2.jpg
Equinox PCB
48 KB

The Oakley OMS-410 Companion
oms410fp.jpg
OMS-410 FP
41 KB		 oms410motm.jpg
OMS-410 PCB
95 KB		 oms410ass1.jpg
OMS-410 Assembley
71 KB
The OMS-410 above is shown only with the parts necessary to work with the MOTM style panel, at left, available from Dave Bradley and Larry Hendry. Adding the other functions available will require more components and a panel with additional inputs/outputs.

oms410all2.jpg
OMS-410 PCB
90 KB
The OMS-410 PCB above is shown with all parts installed except for the second CV for controlling LFO2. By installing LK, both LFO 1 and LFO 2 are controlled by CV 1 as in this example.

The Oakley OMS-820 Companion
oms820fp.jpg
OMS-820 FP
39 KB		 oms820pcb.jpg
OMS-820 PCB A
136 KB		 oms820pcb1.jpg
OMS-820 PCB B
59 KB		 oms820pcb1.jpg
820 Pot Bracket
28 KB
When using the on board Omeg pots and brackets which Tony suppiles, there is a problem with clearance between the PCB and the Lumex MOTM style LEDs. I mounted the pots and brackets offset from the PCB by .093". Click on the thumbnail above right to see how it looks.